Figure 18 setting the async options, Figure 19 adding the consistency groups, 18 setting the async options – HP StorageWorks XP Remote Web Console Software User Manual
Page 57: 19 adding the consistency groups, Combining truecopy with other data, Management operations
Hitachi TrueCopy for z/OS user guide
57
6.
If you plan to create TC390A pairs with M-VOLs in this MCU, configure the MCU async options as
shown in the following figure. For additional instructions, see ”
Figure 18
Setting the Async options
Then register the consistency group(s) to the MCU as shown in the following figure. For additional
instructions, see ”
Adding consistency groups (Add CT Group)
Figure 19
Adding the consistency groups
7.
When you are finished configuring this MCU, exit the TrueCopy main window and close XP Command
View Advanced Edition Software or XP Remote Web Console.
8.
Repeat
for each disk array that will function as a TC390 MCU. After you have
configured the MCUs, registered the RCUs, and configured the TC390 Async options and consistency
groups, you are ready to begin TC390 volume pair operations.
Combining TrueCopy with other data management operations
Some types of volumes used by non-TC390 and non-TC390A functions can also be used as M-VOL and
R-VOL of TC390 and TC390A. The following table explains whether non-TC390 and non-TC390A volumes
are also usable as TC390 and TC390A volumes.