beautypg.com

Table 48 truecopy control unit sims, 48 truecopy control unit sims, Table 48 – HP StorageWorks XP Remote Web Console Software User Manual

Page 188

background image

188 Hitachi TrueCopy z/OS for HP XP12000/XP10000 and SVS 200 storage systems

also reports SIMs to the XP Command View Advanced Edition Software server or XP Remote Web Console

to provide an additional source of notification for the user.
During TC390 operations, the MCU and RCU will generate a service SIM each time the pair status of the

M-VOL or R-VOL changes for any reason, including normal status transitions (for example, pending duplex

to duplex). For TC390A transition states (suspending and deleting), a SIM is generated when the status

changes to the transition state and again when the transition is complete. SIMs generated by the MCU will

include the M-VOL device ID (byte 13) and SIMs generated by the RCU will include the R-VOL device ID

(byte 13). Use the RCU Option window (see

Registering an RCU (Add RCU)

” on page 87) to configure

each MCU to report or not report service-level SIMs to the attached host(s).
The following figure shows a typical 32-byte SIM from the XP12000/XP10000. SIMs are displayed on the

host console by reference code (RC) and severity. The six-digit RC (composed of bytes 22, 23, and 13)

identifies the possible error and determines the severity. The SIM type (byte 28) indicates the component

that experienced the error. When byte 22 = 21, the SIM is a control unit SIM. When byte 22 = Dx, the SIM

is a device SIM. When byte 22 = (D5-D7, DB), the specified pair is TC390A. When byte 22 = (D8 - DC),

the pair is TC390 Synchronous. The SIM reference codes DB6x, DB7x, and DB8x indicate a TC390A pair

suspended by the RCU.

Figure 80

Typical XP12000/XP10000 SIM showing reference code and SIM type

The following table lists and describes the control unit SIMs (byte 28 = F1) related to TC390 operations.

Table 49

on page 189 lists and describes the device SIMs (byte 28 = FE) related to TC390 operations.

Both of these tables also specify the severity, host reporting, and SVP log file for each SIM.

NOTE:

The SIM information for the XP12000/XP10000 changes as new features and functions are

added and supported. Contact your HP account support representative or HP technical support for the

latest SIM information for the XP12000/XP10000.

Table 48

TrueCopy control unit SIMs

Ref. Code Severity

Description

Reported

to Host

SVP Log

File

22

23

21

80

Moderate

The logical path(s) on the remote copy connection(s) was

logically blocked due to an error condition.

Yes

Repeat

SIM Log

21

81

Service

The logical path on the remote copy connection has

recovered from the blocked condition.

Yes*

Once

SSB Log

21

82

Moderate

MCU received notification of an error detection for

communication line from the extender.

Yes

Repeat

SIM Log

This manual is related to the following products: