HP StorageWorks XP Remote Web Console Software - Manual (Page 91)

Hitachi TrueCopy for z/OS user guide 91
Figure 46 Add RCU window – serial interface
For Fibre Channel interface, two types of Fibre Channel ports are provided: 4-port and 2-port adapters.
The port mode depends on the port type. Also, each port may have a different PCB mode setting
(Standard or High). Therefore, when you configure paths among the initiator ports, target ports, and RCU
target ports, study the port modes and specify the correct mode for each port. The following figures shows
a sample TC390 Fibre Channel interface configuration with connections going through switches and the
TC390 Add RCU window used to define this configuration.
Figure 47 Fibre Channel interface connections going through switches