Figure 53 opening the add ssid window, To modify the parameters, 53 opening the add ssid window – HP StorageWorks XP Remote Web Console Software User Manual
Page 101: Modifying, Parameters and omitting selected settings
Hitachi TrueCopy for z/OS user guide 101
NOTE:
The options can be modified and/or canceled after you have set them. See ”
parameters and omitting selected settings
Figure 53
Opening the Add SSID window
4.
To delete the SSID(s): Right-click to display the pop-up menu, click Edit SSID(s) & Path(s), and then click
Delete SSID. The list changes to the SSID Settings Parameter list. Only the RCUs that are to be deleted
are listed.
NOTE:
The options can be modified and/or canceled after you have set them. See ”
parameters and omitting selected settings
5.
Click Apply on the TrueCopy main window.
Modifying parameters and omitting selected settings
After the RCU, Path, and/or SSID operation, the parameters can be modified individually. Also the RCUs,
Paths, and/or SSIDs that you have set by the each operation can be omitted from the pair operation.
To modify the parameters:
1.
Select a RCU, Path, or SSID whose parameters you want to modify on the list.
2.
Right-click to display the pop-up menu and click Modify to modify the parameters. A window for each
operation is displayed.
3.
Modify the parameters and click Set in the window.
4.
Click Apply on the TrueCopy main window.
NOTE:
After the delete operation of the RCU, Path, and/or SSID operation, the Modify command
is not available.
To omit the RCUs, paths, or SSIDs from the operation:
1.
Select the RCUs, Paths, or SSIDs to be omitted from the operation on the list.