HP XP Racks User Manual
Page 103
The following table shows the field descriptions of the output resulting when you run the CQUERY
TSO
PPRC and QUERY ICKDSF PPRCOPY commands.
Description
Field
Device number of the volume on which the CQUERY command is issued.
DEVICE
PRIMARY indicates that the volume is a P-VOL. SECONDARY indicates that the volume
is a S-VOL.
LEVEL
Pair status
STATE
Invalid for BC/SS; “Active” is shown.
PATH STATUS
Invalid for BC/SS; “NO” is shown.
CRIT
Invalid for BC/SS; “NO” is shown.
CGRPLB
SSID of the P-VOL CU
PRIMARY-SSID
P-VOL LDEV number
PRIMARY-CCA
P-VOL CU number
PRIMARY-LSS
P-VOL serial number
PRIMARY-SERIAL
SSID of the S-VOL CU
SECONDARY-SSID
S-VOL LDEV number
SECONDARY-CCA
S-VOL CU number
SECONDARY-LSS
S-VOL serial number. Run the CQUERY TSO PPRC command for the S-VOL to show the
following information:
SECONDARY-SERIAL
00ab000nnnnn
where “a” indicates that the pair is defined as a CG and “b” indicates that you split the
pair using CG pair-split. “0” indicates otherwise. “nnnnn” is the S-VOL serial number.
Invalid for BC/SS; “1” is shown.
PATHS
Invalid for BC/SS; “FFFF FFFF” is shown.
SAID DEST STATUS
Invalid for BC/SS; “PATH ESTABLISH” is shown.
DESCRIPTION
Showing pair status and volume information with CQUERY TSO and QUERY ICKDSF 103