HP XP Racks - Manual (Page 102)

If you run the CQUERY TSO PPRC command to the S-VOL in a CG, the output for the SECONDARY
serial number is shown in the following format:
00|S|@|000|30158
where:
•
S indicates that it is assigned to a CG.
•
@ indicates CG pair-split.
•
30158 is the serial number.
QUERY ICKDSF parameters and examples
The following table shows the QUERY ICKDSF command parameters used to show pair information.
Description Value Parameters
Only one of the three parameters should be
specified. The italic term is the arbitrary name. DDNAME = dname = JCL statement identifying
the volume. DDNAME,
SYSNAME, or
UNITADDRESS
For example, dname is the arbitrary unique
SYSNAME = sysxxx = SYSNAME in the ASSGN
system control statement.
name of the JCL statement which identifies the
volume.
UNITADDRESS = ccuu = device number.
The following image shows an example of running the QUERY ICKDSF PPRCOPY command:
102 Business Copy Z pair user tasks using IBM PPRC