HP Surestore 6.140 Tape Library - Manual (Page 77)

Library Administration
Configuring the Library
Chapter 3 3-3
Li
b
ra
ry Ad
mi
ni
s
trat
ion
Configuring the Library
You can change the following configuration options for the library:
Main Menu ->
Administration ->
Change Configuration
Table 3-1 Configuration Options
Menu Item Description Default Options
Password See “Enabling and Changing the Password”
on page 3-5. Off On or Off
Network
Access See “Using the Remote Management Card” on
page 3-9. DHCP Off Assign an IP
address or
use DHCP
Mailslot
Configuration See “Configuring the Mailslot” on page 3-6. One slot None, one,
five, or ten
slots
Fibre
Channel
or
SCSI IDs
See “Configuring the Library for Fibre
Channel” on page 3-15 or “Setting SCSI IDs”
on page 3-19. N/A N/A
Save Element
Reserve After
a Power
Cycle Allows the host to continue reserving drives
or slots after a power cycle (a SCSI element
reservation). This is typically used to ensure
that only one host can access a slot or drive.
See “Configuration Information” on page 3-27. Off On or Off