HP Surestore 6.140 Tape Library - Manual (Page 42)

Getting Started
Configuring the Host System
Chapter 1 1-26
2. Determine the value for < majornum > by executing the following
command for robotics attached to an HSC or PCI adapter:
lsdev -d sctl
The output resembles the following:
Determine the value for < minornum > using the ioscan command. The
applicable lines in the ioscan output are those that refer to the
controller (contains the product name in the
Description field) and
to the adapter (contains the ext_bus in the Class field).
For the HSC or PCI adapter, the ioscan output for the schgr driver
can differ in two ways, though either indicates successful device file
creation.
• If the schgr driver is configured on the system, this driver
appears to be associated with the library. The output would
resemble the following:
If the schgr driver is not configured on the system, no driver appears
to be associated with the library. The ioscan output line resembles:
Character Block Driver Class
HSC or PCI 203 -1 sctl ctl
Class I H/W Path Driver S/W State H/W Type Description
autoch 0 10/4/4.6.0 schgr CLAIMED DEVICE HP C7200-8000
Class I H/W Path Driver S/W State H/W Type Description
unknown -1 10/4/4.6.0 UNCLAIMED DEVICE HP C7200-8000