HP Surestore 6.140 Tape Library - Manual (Page 158)

Understanding Errors and Troubleshooting
Removing and Replacing Cards
Chapter 4 4-52
Replacing a Card
1. Align the edges of the replacement card with the card slot.
2. Gently push the replacement card into the library until the card is
flush with the library.
3. Tighten the thumbscrews (finger tight).
4. Reconnect external cables.
5. Power on the library.
6. Download new firmware (see “Upgrading Firmware” on page 4-60).
7. If installing Fibre Channel or remote management cards for the first
time, configure the library from the front panel. See “Configuring the
Library for Fibre Channel” on page 3-15 or “Using the Remote
Management Card” on page 3-9.