HP Surestore 6.140 Tape Library - Manual (Page 123)

Understanding Errors and Troubleshooting
Interpreting Library LEDs
Chapter 4 4-17
E
rr
o
rs
&
T
roub
le
sh
oo
ti
ng
Interpreting Library LEDs
LEDs communicate status and errors as they are occurring. Use the
library LEDs to help determine the state of the library.
All library cards and drive modules contain LEDs. In general, a yellow
LED comes on during power up and changes to green when power up is
successful. This may take a few minutes on some library cards.
The LED bar beneath the front panel display indicates library activity.
NOTE Table 4-2 on page 4-18 shows the back view of the library. Detailed LED
illustrations follow.
Green: Library is ready and idle.
Flashing Green: Library or drive is active.
Amber: Library is partially available and idle (see page
4-8).
Flashing Amber: Library failed (see page 4-13).