HP Surestore 6.140 Tape Library - Manual (Page 152)

Understanding Errors and Troubleshooting
Diagnostic Support Tools
Chapter 4 4-46
Utility Rezero Performs “rezero” command on robotics.
Position to
Element
Performs “position to element” command on robotics.
Move Medium Moves 1 tape cartridge in library.
Exchange Medium Moves 2 tape cartridges in library.
Init Element
Status
Performs “initialize element status” command on
robotics.
Set Drive
Status
Changes on-line drive repair status of tape drives in
library.
Recalibrate (May not be supported, depending on library model.)
Performs a “recalibrate” diagnostic test and reports
results.
Data Capture Runs the “tape_capture -D -m” command and
displays the results.
Set Serial
Number
Changes the electronic serial number of robotics.
Options Display Format Displays data as either raw hex, decoded format text,
or both.
Table 4-15 Robotic Controller Expert Tool Command
Category Command Effect