HP Surestore 6.140 Tape Library User Manual
Page 207
Drives and Media
Quantum DLT Drives & Media
Appendix D
D-7
D
riv
e
s
&
M
e
d
ia
Using DLT Tape Cartridges
CAUTION
Quantum DLT tape drives require special cleaning cartridges and data
cartridges formatted specifically for Quantum DLT. To avoid damage to
your tape drive, it is critical to use appropriate DLT cleaning cartridges
and properly formatted DLT data cartridges.
This section describes the following:
• Write-Protecting DLT Cartridges
• Using DLT Cartridge Bar Code Labels
• Loading DLT Cartridges into a Magazine
• Using DLT Cleaning Cartridges
In addition to the information provided in this manual, refer to the
documentation provided with your DLT media for more information.
Inspecting DLT Cartridges
NOTE
Make it a practice to visually inspect your tape cartridges when removing
or loading them into your tape library. Taking a few minutes to check the
condition of the cartridges will lower the risk of repeated failures and help
ensure uninterrupted backup.
Repeated drive failures may indicate defective tapes. Tapes need to be
inspected and replaced if they have been dropped, damaged, or used with
a failed drive. To determine if the tapes have been damaged:
• Gently shake the tape cartridge to verify that no internal parts are
rattling.
• Visually inspect the tape for a broken, unseated, or misaligned tape
leader (item A in Figure D-1 on page D-8).