HP Surestore 6.140 Tape Library - Manual (Page 70)

Library Operations
Accessing Tapes in the Library
Chapter 2 2-12
Figure 2-6 Removing/Replacing a Magazine
3. Remove the magazine by lifting it straight up with the handle (Figure
2-6).
4. To remove a tape, set the magazine on its back and grasp the top and
bottom corners of the tape. Pull the tape straight out of the magazine.
5. If desired, insert tapes into the magazine. Ensure that you use the
appropriate tape type for the magazine. Push the tape into the slot
until it “clicks” into place. (For more information, see Appendix D.)
6. Reload the magazine into the door tray, and close the door. The library
will run an inventory check on the contents of that tape door.
NOTE If the library does not have all magazines, it will report a partial
availability message (see “Partial Availability State” on page 4-8).