HP Surestore 6.140 Tape Library - Manual (Page 56)

Getting Started
Moving or Shipping the Library
Chapter 1 1-40
5. Use a socket wrench to attach the front and rear pallet shipping
brackets to secure the library to the shipping pallet (see Figure 1-8).
Each bracket has four bolts.
NOTE The rear pallet shipping bracket may already be attached to the shipping
pallet since it was not necessary to remove this bracket when the library
was initially unpackaged.
a. Attach the two 7/16 bolts that secure each bracket to the library.
b. Attach the two 9/16 bolts that secure each bracket to the pallet.
Figure 1-8 Attaching the Pallet Shipping Brackets