Installing a drive module, Installing a drive module -58, Figure 4-4. installing a drive module -58 – HP Surestore 6.140 Tape Library User Manual

Page 164

Text mode
Original mode

Understanding Errors and Troubleshooting

Removing and Replacing Drive Modules

Chapter 4

4-58

Installing a Drive Module

NOTE

It is not necessary to power off the library when inserting a replacement
drive module. However, do not insert your hand or foreign objects through
the empty drive bay and into the vertical lift assembly area.

1. Hold the drive module with one hand on the drive module handle

while the other hand supports the bottom (Figure 4-4).

2. Install the drive by inserting the rail at the top of the drive module

into the slot at the top of the drive module opening.

NOTE

Higher force will be required in the last half-inch of insertion to engage
the electrical connection.

Figure 4-4

Installing a Drive Module