HP Neoware e140 Thin Client - Manual (Page 464)

C-94
Host Command Summary
Additional Commands
DISPLAY COLOUR
DEC VT modes: Foreground colour CSI = * F
Background colour CSI = * G
where * is one of the following numbers:
0 Black 4 Red 8 Grey 12 Light Red
1 Blue 5 Magenta 9 Light Blue 13 Light Magenta
2 Green 6 Brown 10 Light Green 14 Yellow
3 Cyan 7 White 11 Light Cyan 15 Light White
Reflection 4 compatibility: Foreground colour ESC [ 3 x m
Foreground+bold colour ESC [ 4 x m
Background colour ESC [ 5 x m
Background+bold colour ESC [ 6 x m
DISPLAY SIZE
Number of screen lines ESC [ = 1 ; * p
MOUSE CURSOR
Mouse cursor style (see table below for * value) ESC [ = 2 ; * p
0
1
2
3
Default Cursor
(I-Beam)
4
5
6
7
8
9
10 No Cursor
MOUSE REPORTING IN ALPHANUMERIC APPLICATIONS
Arm the emulator for mouse operation ESC [ = *arg g
where *arg is of the format: bit 7 - 3 0 0 1 1 0
bit 2 when set enables motion events
bit 1 when set enables button release events
bit 0 when set enables button press events
If all bits are cleared then any outstanding arming request is cancelled. The mouse remains
armed until cancelled. When any of the selected events occur, the following report format is
sent to the host:
ESC [ = ; ; ; rWhere: is the event(s) that caused the report in the sameformat as the arming sequence.
Where: is the event(s) that caused the report in the same
format as the arming sequence.