HP Neoware e140 Thin Client - Manual (Page 425)

C-55
Host Command Summary
ReGIS Emulation
MODE SELECTION
Exit to VT100/VT200 mode ESC \
MOUSE BUTTON PROGRAMMING
Program a mouse button (*c = clear, *b = button, ESC P *c $ w *b/*p/*r ESC \
*p = press code, *r = release code)
SIXEL GRAPHICS
Direct sixels to host ESC [ ? 2 i
Direct sixels to printer ESC [ ? 0 i or ESC [ ? 1 i
Transmit sixel data (*p = pixel shape, ESC P *p ; *b ; *h ; q *..* ESC \
*b = backgrnd colour *h = horiz. spacing, *..* = sixel data)
COMMAND LEVEL INPUT SELECTION
Select command level input ;
COMMAND SET STORING/INVOKING
Clear all stored command sets @.
Clear stored command set @: character @;
Invoke command set @ character
Store command set @: character set definition @;
CURVE DRAWING
Draw arc from specified start position C(A deg of drawing ) start posn
Draw arc with specified centre position C(A deg of drawing C) centre posn
Draw circle with specified centre C(C) centre position
Draw circle specified circum. point C circumference point
Draw closed interpolated curve inter-
secting current & specified positions
C(B) positions (E)
Draw closed interpolated curve intersecting current &
specified positions, closed with a straight line
C(B)[] positions [](E)
Draw open interpolated curve C(S) positions (E)
Draw open interpolated curve inter-
secting current & all specified positions
C(S)[] positions [](E)
Set temporary writing controls effective only for the
command, using 'W' Writing Control cmd & options
C options (W( sub-opts )) opts
FILLING SHAPES
Define curved boundary shape for filling
using 'C' Curve Drawing com. & options
F(C sub-options )
Define straight boundary shape for filling
using 'V' Draw Vector command & options
F(V sub-options )
Set cursor position using 'P' command & options F(P( sub-options ))
Set temporary writing controls effective only for the
command using 'W' Writing Control cmd & options
F(W( sub-options ) options)