HP Neoware e140 Thin Client - Manual (Page 220)

10-8
HP 700-92/96 Emulation
Auto LF - F8
This button and the F8 key enables or disables Auto Line Feed mode. When enabled,
a line feed command is automatically appended to every carriage return command
generated from the keyboard. The setting may be saved by selecting Save Session in
the File menu.
Configuration Selection
This set of function buttons is displayed by pressing the F9 key (which is equivalent
to the HP 700-92/96 User System key). These functions enable you to access three
other sets of function labels.
Device Control - F1
Clicking this button or pressing F1 will cause the Device Control function labels to
be displayed. The buttons and keys F1 through F8 will function as described in the
following section entitled Device Control.
Margins/Tabs/Col - F2
Clicking this button or pressing F2 will cause the Margins/Tabs/Col function labels
to be displayed. The buttons and keys F1 through F8 will function as described in the
section entitled Margins, Tabs & Start Column.
Modes - F4
Clicking this button or pressing F4 will cause the Mode Selection function labels to
be displayed. The buttons and keys F1 through F8 will function as described in the
previous section entitled Mode Selection.
Device Control
This set of function buttons is displayed by pressing the F9 key (which is equivalent
to the HP 700-92/96 User System key) then F1. These functions enable you to select
the device(s) to which data is sent and also to copy portions of data from display
memory to the printer.