HP Neoware e140 Thin Client - Manual (Page 147)

6-63
Setup Menus
Use optional poll/select characters
Factory default: Unselected
Specifies whether the optional poll select sequence, 7B 7C hex, is to be used instead of
the standard sequence 70 71 hex (default).
Environments Settings
Lines per page
Factory default: 24
This specifies the number of lines allocated to each logical page of data in the range 1
to 256.
Chars per line
Factory default: 80
This specifies the width of the page as 40, 80 or 132 characters.
Lines per Screen
Factory default: 24
This specifies the number of text lines to be displayed per full screen in the rage 0 to
24. Note that lines can be displayed as single-height or double-height as determined by
the setting of the Lines are double height option.
Alt US Char
Factory default: ^_
This specifies the character to be used as the unit separator. This will be converted into
a US character when you invoke forms mode.
Alt RS Char
Factory default: ^^
This specifies the character to be used as the record separator. This will be converted
into an RS character when you invoke forms mode.
Pages
Factory default: 2
This determines the number of pages in each environment, in the range 1 to 24.
Env
Factory default: 1
An environment is an area of memory reserved for exclusive use by applications. Up
to three environments can be defined (depending on the Protocol setting) and this
option specifies the number of the current environment definition.