HP Neoware e140 Thin Client - Manual (Page 110)

6-26
Setup Menus
Emulation Settings
This dialog box is displayed by selecting Emulation in the Settings menu.
Alpha Emulation
(Not available in WBT mode)
The setting of this option determines the current alpha emulation mode.
The ADDS A2 emulation provides compatibility with software designed to drive the
ADDS Viewpoint A2 terminal, as emulated by the Wyse WY-50/50+/60 terminals.
Refer to the Wyse Emulations chapter for details.
The AIXTerm emulation provides compatibility with software designed to drive an X
terminal using X Windows.
The ANSI BBS emulation is a derivative of the ANSI device driver ANSI.SYS
supplied with all DOS based PCs and which provides the screen management for the
DOS console screen. PC based UNIX systems and Bulletin Board Systems (BBS)
often rely on the ANSI emulation when being accessed by a PC. In ANSI BBS mode
the screen size is adjusted to 25 lines and the Preferred Char. Set option in the
Terminal Settings dialog box is automatically set to Ansi. The setting of the Ansi
Code Page option in this dialog box determines the characters available in the ANSI
BBS set.
The AT 386 emulation provides compatibility with software designed to drive the
AT&T AT 386 terminal.
The ATT4410 emulation provides compatibility with software designed to drive the
AT&T Dataspeed 4410 terminal. Refer to the AT&T 4410 Emulation section in the
Getting Started chapter for details.
The BQ 3107 emulation provides compatibility with software designed to drive the
Bull BQ 3107 terminal. Refer to the BQ 3107 Emulation chapter for details.