Replacing the failed component – HP 4000.6000.8000 Enterprise Virtual Arrays User Manual
Page 99
Table 30 Hardware component CSR support (continued)
CSR
Spare part number (non
RoHS/RoHS)
Description
✓
390853-001, 70-41140-S1/
411632-005, 70-41140-S3
Front panel bezel EVA8000
✓
390854-001, 70-41140-S2/
411632-006, 70-41140-S5
Front panel bezel EVA8100
✓
411633-005, 70-41140-S4
(both RoHS)
Front panel bezel EVA4000/6000
✓
411633-006, 70-41140-S6
(both RoHS)
Front panel bezel EVA4100/6100
For more information about CSR, contact your local service provider. For North America, see the
CSR website:
To determine the warranty service provided for this product, see the warranty information website:
To order a replacement part, contact an HP-authorized service provider or see the HP Parts Store
online:
Replacing the failed component
CAUTION:
Components can be damaged by electrostatic discharge. Use proper anti-static
protection.
•
Always transport and store CRUs in an ESD protective enclosure.
•
Do not remove the CRU from the ESD protective enclosure until you are ready to install it.
•
Always use ESD precautions, such as a wrist strap, heel straps on conductive flooring, and
an ESD protective smock when handling ESD sensitive equipment.
•
Avoid touching the CRU connector pins, leads, or circuitry.
•
Do not place ESD generating material such as paper or non anti-static (pink) plastic in an ESD
protective enclosure with ESD sensitive equipment.
•
HP recommends waiting until periods of low storage system activity to replace a component.
•
When replacing components at the rear of the rack, cabling may obstruct access to the
component. Carefully move any cables out of the way to avoid loosening any connections.
In particular, avoid cable damage that may be caused by:
◦
Kinking or bending.
◦
Disconnecting cables without capping. If uncapped, cable performance may be impaired
by contact with dust, metal or other surfaces.
◦
Placing removed cables on the floor or other surfaces, where they may be walked on or
otherwise compressed.
•
Replacement procedures are provided with each component. You can also download the
following replacement instructions from the Manuals page of the HP Business Support Center
website. See
“Related information” (page 101)
for more information.
◦
HP Controller Blower Replacement Instructions
◦
HP Controller Enclosure Cache Battery Replacement Instructions
Best practices for replacing hardware components
99