HP 4000.6000.8000 Enterprise Virtual Arrays - Manual (Page 114)

Table 36 EVA4x00 power specifications — 208 Volts
2C4D 2C3D 2C2D 2C1D Specification
1767 1390 1013 638 Total System Wattage Typical
1
5585 4300 3014 1729 Total System BTU/hour
4.4 3.5 2.6 1.6 Input Current (A) -
Typical per line
220 170 132 98 In Rush Current (A)
7.5 5.9 4.3 2.7 Input Current (A) -
Maximum per line Failover Mode
1
Typical is described as a system in normal steady state operation. (i.e., both PDUs operating normally, the array
reading/writing to disk drives in a production environment).
This data represents fully populated drive enclosures with 15K RPM disk drives. Other drive types may vary slightly. For
example, if you are using 10K RPM drives, the power specifications will be approximately 20% less than the 15K RPM
drives.
Table 37 EVA4x00 power specifications — 230 Volts
2C4D 2C3D 2C2D 2C1D Specification
1767 1390 1013 638 Total System
Wattage Typical
1
5585 4300 3014 1729 Total System
BTU/hour
4.2 3.3 2.4 1.5 Input Current (A) -
Typical per line
244 190 147 104 In Rush Current (A)
7.1 5.5 4.1 2.6 Input Current (A) -
Maximum per line Failover Mode
1 Typical is described as a system in normal steady state operation. (i.e., both PDUs operating normally, the array
reading/writing to disk drives in a production environment).
This data represents fully populated drive enclosures with 15K RPM disk drives. Other drive types may vary slightly. For
example, if you are using 10K RPM drives, the power specifications will be approximately 20% less than the 15K RPM
drives.
Table 38 EVA6x00 power specifications — 208 Volts
2C8D 2C7D 2C6D 2C5D 2C4D Specification
3344 2967 2590 2214 1837 Total System
Wattage Typical
1
11409 10124 8838 7553 6268 Total System
BTU/hour
8.4 7.4 6.5 5.5 4.6 Input Current (A) -
Typical per line
363 321 280 250 220 In Rush Current (A)
14.2 12.6 11.0 9.4 7.8 Input Current (A) -
Maximum per line Failover Mode
1
Typical is described as a system in normal steady state operation. (i.e., both PDUs operating normally, the array
reading/writing to disk drives in a production environment).
114 Regulatory notices and specifications