AMX Modero NXD-CV5 - Manual (Page 16)

Introduction
4 NXD-CV5 5" Modero Wall/Flush Mount Touch Panel
Product Specifications (Cont.)
Operating / Storage
Environment: • Operating Temperature: 0° C (32° F) to 40° C (104° F)
• Operating Humidity: 20% - 85% RH
• Storage Temperature: -20° C (-4° F) to 60° C (140° F)
• Storage Humidity: 5% - 85% RH
Included Accessories: • Installation Kit for NXD-CV5 panels (KA2261-01):
- 2-pin 3.5 mm mini-Phoenix connector
- Three Drywall clips (62-5924-05) and #6 - sheet metal screws
- Three Phillips-head screws (#4-40 x 0.250 Black)
• Mounting Template - Flush Mount Drywall Installation
• Trim Ring with button openings (60-2261-04) (factory installed)
• Trim Ring without button openings (60-2261-05)
Other AMX Equipment: • CB-TP5 Rough-In/Wallbox (FG038-10)
• NXA-AVB/ETHERNET Breakout Box (FG2254-10)
- Provides video/audio distribution to the A/V panel over CAT5 cable
(up to 200’/60.96 m) and accepts either Composite or S-Video
• NXA-BEZ-5B, Bezel Kit with buttons for Modero 5” Widescreen Wall/Flush
Mount Touch Panel (NXD-CV5)
- NXA-BEZ-5B-BG, Beige Faceplate with beige buttons (FG2261-32)
- NXA-BEZ-5B-BL, Black Faceplate with black buttons (FG2261-30)
- NXA-BEZ-5B-LA, Light Almond Faceplate with light almond buttons
(FG2261-33)
- NXA-BEZ-5B-WH, White Faceplate with white buttons (FG2261-31)
• NXA-BEZ-5NB, Bezel Kit without buttons for Modero 5” Widescreen Wall/
Flush Mount Touch Panel (NXD-CV5)
- NXA-BEZ-5NB-BG, Beige Faceplate without buttons (FG2261-42)
- NXA-BEZ-5NB-BL, Black Faceplate without buttons (FG2261-40)
- NXA-BEZ-5NB-LA, Light Almond Faceplate without buttons (FG2261-43)
- NXA-BEZ-5NB-WH, White Faceplate without buttons (FG2261-41)
• NXA-CV5AM, Modero 5" Angle Mount Kit (FG2904-56):
- Wedge for 5" WallMount
- Wedge Mounting Template - Flush Mount Drywall Installation
- Three 1/8" diameter by 3" length Toggle Bolts (with wings)
- Three 4-20 x.375 LG screws, PPH, Plastite, Black Zinc
• NXA-RK5 RackMount Kit for 5" Wall Mount panels (FG2904-55):
- 5" RakMount
- Four Screws, #10-32 x.625, PH Truss, BLK
- Four Washers, #10, Black Nylon
- Three Screws, #4-40 x.250, PPH, BLK
It is recommended that firmware KIT files only be transferred over a direct USB or
Ethernet connection and only when the panel is connected to a power supply. If
battery power fails during a firmware upgrade, the panel flash file system may
become corrupted.