AMX Modero NXD-CV5 - Manual (Page 112)

Programming
100 NXD-CV5 5" Modero Wall/Flush Mount Touch Panel
"^" Button Commands (Cont.)
^BNN
Set the TakeNote
network name for
the specified
Addresses.
Syntax:
"'^BNN-,'"
Variable:
variable text address range = 1 - 4000.
network name = Use a valid IP Address.
Example:
SEND_COMMAND Panel,"'^BNN-973,192.168.169.99'"
Sets the TakeNote button network name to 192.168.169.99.
^BNT
Set the TakeNote
network port for
the specified
Addresses.
Syntax:
"'^BNT-,'"
Variable:
variable text address range = 1 - 4000.
network port = 1 - 65535.
Example:
SEND_COMMAND Panel,"'^BNT-973,5000'"
Sets the TakeNote button network port to 5000.
^BOP
Set the button
opacity.
The button opacity can be specified as a decimal between 0 - 255, where zero (0) is
invisible and 255 is opaque, or as a HEX code, as used in the color commands by
preceding the HEX code with the # sign. In this case, #00 becomes invisible and #FF
becomes opaque. If the opacity is set to zero (0), this does not make the button inactive,
only invisible.
Syntax:
"'^BOP-,,'"Variable: variable text address range = 1 - 4000.
button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
1 = Off state and 2 = On state).
button opacity = 0 (invisible) - 255 (opaque).Example:SEND_COMMAND Panel,"'^BOP-500.504&510.515,1,200'"Example 2:SEND_COMMAND Panel,"'^BOP-500.504&510.515,1,#C8'"Both examples set the opacity of the buttons with the variable text range of 500-504 and
510-515 to 200.^BORSet a border to a
specific border
style associated
with a border
value for those
buttons with a
defined address
range.Refer to theBorder Styles and Programming Numbers table on page 91 for more
information.
Syntax: "'^BOR-,'"Variable: variable text address range = 1 - 4000.
border style name = Refer to the Border Styles and Programming Numbers table on
page 91.
border value = 0 - 41.Examples:SEND_COMMAND Panel,"'^BOR-500.504&510.515,10'"Sets the border by number (#10) to those buttons with the variable text range of 500-504
& 510-515.SEND_COMMAND Panel,"'^BOR-500.504&510,AMX Elite -M'"Sets the border by name (AMX Elite) to those buttons with the variable text range of
500-504 & 510-515.
The border style is available through the TPDesign4 border-style drop-down list. Refer to
theTPD4 Border Styles by Name table on page 91 for more information.
Variable:
variable text address range = 1 - 4000.
button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
1 = Off state and 2 = On state).
button opacity = 0 (invisible) - 255 (opaque).
Example:
SEND_COMMAND Panel,"'^BOP-500.504&510.515,1,200'"
Example 2:
SEND_COMMAND Panel,"'^BOP-500.504&510.515,1,#C8'"
Both examples set the opacity of the buttons with the variable text range of 500-504 and
510-515 to 200.
^BOR
Set a border to a
specific border
style associated
with a border
value for those
buttons with a
defined address
range.
Refer to theBorder Styles and Programming Numbers table on page 91 for more
information.
Syntax:
"'^BOR-,'"
Variable:
variable text address range = 1 - 4000.
border style name = Refer to the Border Styles and Programming Numbers table on
page 91.
border value = 0 - 41.
Examples:
SEND_COMMAND Panel,"'^BOR-500.504&510.515,10'"
Sets the border by number (#10) to those buttons with the variable text range of 500-504
& 510-515.
SEND_COMMAND Panel,"'^BOR-500.504&510,AMX Elite -M'"
Sets the border by name (AMX Elite) to those buttons with the variable text range of
500-504 & 510-515.
The border style is available through the TPDesign4 border-style drop-down list. Refer to
theTPD4 Border Styles by Name table on page 91 for more information.