Setting for output item – KYORITSU 6310 Instruction Manual User Manual
Page 96
4.2.2 Measurement Setting (QUALITY-Flicker) KEW6310
4.55
KEW6310
2 Select a desirable filter factor with
Cusor
Key and press the
ENTER
Key.
Setting for Output item
Follow the procedure below to make setting for output items. (conditions for output to Output terminal)
Pst(1min)／Pst／Plt
* Default value (or after system reset) : Pst(1miin)
* where :
Output item = Pst, Output threshold = 1.0,
threshold check is done when Pst is refreshed (every 10 min)
1 Select any desirable [Output item] with
Cursor
Key and press the
ENTER
Key.
2 Select a desirable filter factor with
Cusor
Key and press the
ENTER
Key.
Drop down list appears.
Selected filter factor
will be displayed.
Drop down list appears.
Selected output item
will be displayed.
- 1009 (13 pages)
- 1011 (12 pages)
- 1012 (12 pages)
- 1018 (1 page)
- 1030 (1 page)
- 1061 (58 pages)
- 1051 (40 pages)
- 1109S (36 pages)
- 1110 (1 page)
- 2000 (1 page)
- 2002PA (27 pages)
- 2007A (1 page)
- 2009R (33 pages)
- 2012R (2 pages)
- 2017 (1 page)
- 2031 (1 page)
- 2033 (9 pages)
- 2040 (2 pages)
- 2046R (2 pages)
- 2200 (3 pages)
- 2210R (1 page)
- 2300R (1 page)
- 2413F (24 pages)
- 2413R (24 pages)
- 2431 (2 pages)
- 2432 (1 page)
- 2433R (1 page)
- 2434 (10 pages)
- 2500 (1 page)
- 2608A (2 pages)
- 3005A (24 pages)
- 3021 (24 pages)
- 3121A (12 pages)
- 3126 (28 pages)
- 3127 (60 pages)
- 3128 (88 pages)
- 3131A (20 pages)
- 3132A (20 pages)
- 3161A (24 pages)
- 3321A (24 pages)
- 4105A (10 pages)
- 4106 (48 pages)
- 4116A (20 pages)
- 4140 (32 pages)
- 4200 (24 pages)