Setting for filter – KYORITSU 6310 Instruction Manual User Manual
Page 58
4.2.1 Basic Setting KEW6310
4.17
KEW6310
Setting for Filter
Lowpass filter activate to cut frequencies in higher harmonic band when set the Filter function “ON”.
(Cutoff frequency : approx 160Hz)
Filter
Available (ON⇔OFF)
Not available (------)
Wiring
⑦
1P3W x 1+2A 3,4ch
⑩
3P3W x 1+2A 3,4ch
⑬
3P4W x 1+1A 4ch
4A
Clamp Sensor
8141/42/43/46/47/48
8128/27/26/25/24/29
* Default value (or after system reset) : ----- or OFF
* Bar “------“ is displayed for the Filter other than listed above, and a setting cannot be made.
1
Press the
Cursor
Keys and select [Filter], and then press the
ENTER
Key.
2
Press the
Cursor
Keys and select “ON” or “OFF”, and then press the
ENTER
Key.
3
Press the
Cursor
Keys and select ON / OFF for the other Chs, and make settings in the
same
way.
Drop down list appears.
Incapable of selecting ON/OFF
depending on the connected Sensors.
Selected Filter setting (ON or OFF) is displayed.
0