Setting for frequency – KYORITSU 6310 Instruction Manual User Manual
Page 60
4.2.1 Basic Setting KEW6310
4.19
KEW6310
Setting for Frequency
Frequency of the fixed clock can be changed according to following procedure when PLL synchronized
measurement cannot be made.
50Hz 60Hz
* Default value (or after system reset) : 50Hz
1
Press the
Cursor
Keys and select [Freq], and then press the
ENTER
Key.
2
Press the
Cursor
Keys and select “50Hz” or “60Hz”, and then press the
ENTER
Key.
Drop down list appears.
Selected frequency is displayed.
See also other documents in the category KYORITSU Tools:
- 1009 (13 pages)
- 1011 (12 pages)
- 1012 (12 pages)
- 1018 (1 page)
- 1030 (1 page)
- 1061 (58 pages)
- 1051 (40 pages)
- 1109S (36 pages)
- 1110 (1 page)
- 2000 (1 page)
- 2002PA (27 pages)
- 2007A (1 page)
- 2009R (33 pages)
- 2012R (2 pages)
- 2017 (1 page)
- 2031 (1 page)
- 2033 (9 pages)
- 2040 (2 pages)
- 2046R (2 pages)
- 2200 (3 pages)
- 2210R (1 page)
- 2300R (1 page)
- 2413F (24 pages)
- 2413R (24 pages)
- 2431 (2 pages)
- 2432 (1 page)
- 2433R (1 page)
- 2434 (10 pages)
- 2500 (1 page)
- 2608A (2 pages)
- 3005A (24 pages)
- 3021 (24 pages)
- 3121A (12 pages)
- 3126 (28 pages)
- 3127 (60 pages)
- 3128 (88 pages)
- 3131A (20 pages)
- 3132A (20 pages)
- 3161A (24 pages)
- 3321A (24 pages)
- 4105A (10 pages)
- 4106 (48 pages)
- 4116A (20 pages)
- 4140 (32 pages)
- 4200 (24 pages)