KYORITSU 6310 Instruction Manual - Manual (Page 257)

KEW6310 12.1 Instrument and CF card / Internal memory
KEW6310
12.2
Max number of data / Estimated time
Destination to save data CF Card
Internal
Memory
Capacity 32MB 64MB 128MB 256MB 512MB 1GB 1.8MB
1sec 15H 1D 2D 5D 10D 20D 7min
1min 10D 20D 1M 2M 5M 10M 2H
Instantaneous value
measurement
30min 10M 1Y Over 1Y Over 1Y Over 1Y Over 1Y 2D
1sec 6H 13H 1D 2D 4D 8D 3min
1min 7D 15D 1M 2M 4M 8M 1H
Integration value
measurement
30min 7M 1Y Over 1Y Over 1Y Over 1Y Over 1Y 1D
1sec 4H 8H 17H 1D 2D 5D 2min
1min 6D 12D 24D 1M 3M 6M 1H DEMAND measurement
30min 6M 1Y Over 1Y Over 1Y Over 1Y Over 1Y 1D
10sec 1D 3D 7D 14D 28D 1M 20min
1min 10D 21D 1M 2M 5M 11M 2H WAVE Range
30min 10M 1Y Over 1Y Over 1Y Over 1Y Over 1Y 2D
15sec 3D 7D 15D 1M 2M 4M 44min
1min 15D 1M 2M 4M 8M 1 年 2H Harmonic anaysis
30min 1Y Over 1Y Over 1Y Over 1Y Over 1Y Over 1Y 3D
1sec 2D 5D 11D 22D 1M 2M 32min
1min 5M 11M 1Y Over 1Y Over 1Y Over 1Y 1D Swell / Dip / Int measurement
30min Over 1Y Over 1Y Over 1Y Over 1Y Over 1Y Over 1Y 1M
1sec 3D 6D 12D 24D 1M 3M 35min
1min 6M 1Y Over 1Y Over 1Y Over 1Y Over 1Y 1D Transient measurement
30min Over 1Y Over 1Y Over 1Y Over 1Y Over 1Y Over 1Y 1M
1sec 2D 5D 11D 22D 1M 2M 32min
1min 5M 11M 1Y Over 1Y Over 1Y Over 1Y 1D Inrush Current measurement
30min Over 1Y Over 1Y Over 1Y Over 1Y Over 1Y Over 1Y 1M
1sec 21H 1D 3D 7D 14D 27D 10min
1min 14D 29D 1M 3M 7M 1Y 2H Unbalance Rate
30min 1Y Over 1Y Over 1Y Over 1Y Over 1Y Over 1Y 3D
Flicker*1 1min 7M 1Y Over 1Y Over 1Y Over 1Y Over 1Y 1D
1sec 15H 1D 2D 5D 10D 19D 7min
1min 10D 20D 1M 2M 5M 10M 1H Capacitance calculation
30min 10M 1Y Over 1Y Over 1Y Over 1Y Over 1Y 2D
Measurement data file (CSV) 6
Graphics file (BMP) 7
Max number of file
Configuration file (KAS)
512
20
* In case that no file exist in the CF card or the Internal memory.
where : H= hour(s), D=day(s), M=month(s), Y=year(s)
Numbers and time listed above are the minimum ones.
*1 Assumed one event occur per minute and calculated.
* Flicker measurement function is only available with ver.2.00 or later.