KYORITSU 6310 Instruction Manual - Manual (Page 294)

16.9 Specification of Clamp sensor KEW6310
16.11
KEW6310
16.9 Specification of Clamp sensor
< MODEL8128 > < MODEL8127 > < MODEL8126 >
Rated current AC 5Arms
(max rating: AC50Armns)
AC 100Arms
(141Apeak)
AC 200Arms
(283Apeak)
Output voltage
0 ~ 50Arms (AC 50mV/AC 5A)
(AC 500mV/AC50A)
AC0 ~ 500mV
(AC500mV/AC100A) : 5mV/A
AC0 ~ 500mV
(AC 500mV/AC200A) : 2.5mV/A
Measuring range
AC0 ~ 50Arms(70.7Apeak) AC0 ~ 100A AC0 ~ 200A
Accuracy
(sine input) ±0.5%rdg±0.1mV (50/60Hz)
±1.0%rdg±0.2mV (40Hz ~ 1kHz)
Phase
characteristics
within ±2.0°
(0.5 ~ 50A/ 45 ~ 65Hz)
within ±2.0°
(1 ~ 100A/ 45 ~ 65Hz)
within ±1.0°
(2 ~ 200A/ 45 ~ 65Hz)
Temp. & humidity
range (guaranteed
accuracy)
23±5°C, relative humidity 85% or less (no condensation)
Operating temp.
range
0 ~ 50°C, relative humidity 85% or less (no condensation)
Storage temp.
range
-20 ~ 60°C, relative humidity 85% or less (no condensation)
Allowable input AC50Arms (50/60Hz) AC100Arms (50/60Hz) AC200Arms (50/60Hz)
Output impedance approx 20Ω approx 10Ω approx 5Ω
Location for use indoor use, altitude 2000m or less
Applicable standard IEC 61010-1, IEC 61010-2-032
Measurement CAT.III (300V) Pollution degree 2
IEC61326
IEC 61010-1, IEC 61010-2-032
Measurement CAT.III (600V)
Pollution degree 2 IEC61326
Withstand voltage AC3540V/ 5 sec
between Jaws – enclosure,
enclosure – output terminal,
Jaws – output terminal
AC3540V/ 5 sec
between Jaws – enclosure,
enclosure – output terminal,
Jaws – output terminal
AC5350V/ 5 sec
between Jaws – enclosure,
enclosure – output terminal,
Jaws – output terminal
Insulation
resistance 50MΩ or more/ 1000V
between Jaws – enclosure, enclosure – output terminal, Jaws – output terminal
Max conductor size Φ24mm Φ40mm
Dimension
100(L) × 60(W) × 26(D)mm 128(L) × 81(W) × 36(D)mm
Cable length
approx 3m
Output terminal MINI DIN 6PIN
Weight
approx 160g approx 260g
Accessory Instruction manual, Cable marker
Option 7146 (Φ4 Banana plug), 7185 (Extension lead)