KYORITSU 6310 Instruction Manual - Manual (Page 25)

KEW6310 2.5 Marks displayed on the LCD
KEW6310
2.6
2.5 Marks displayed on the LCD
Flash while saving data
Flash in stand-by mode
Flash while saving data to a CF Card
Flash while saving data to the internal memory
Displayed when the capacity of CF Card or the internal
memory is full
Displayed when KEW6310 is operating with AC power supply
Displayed when KEW6310 is operating with batteries
Displayed while Data hold function is activated
Displayed when measured voltage exceeds a certain condition
Displayed when measured current exceeds a certain condition
Displayed on the screen for Instantaneous value measurement
Displayed on the screen for Integration value measurement
Displayed on the screen for Demand measurement
Displayed on the WAVE Range screen
Displayed on the screen for Harmonic analysis
Displayed on the screen for Power quality measurement
Displayed on the screen for Capacitance calculation
Displayed on the Setting screen
Displayed while Keys are locked
Displayed when swell occurs at Power quality measurement
Displayed when dip occurs at Power quality measurement
Displayed when short-interruption (int) occurs at Power quality
measurement
Displayed with sum of values measured at each CH