Other functions, 1 input/ output terminals, Connection – KYORITSU 6310 Instruction Manual User Manual
Page 276
14.1 Input/ Output terminals KEW6310
14.1
KEW6310
14. Other functions
14.1 Input/ Output terminals
Connection
1
Press the recutangular protrusion above a terminal with a flar-blade screw driver, and insert
a signal wire.
2
Release the driver and fix the wire.
Connect wires to the proper terminals.
Wires of following dimensions can be used.
Suitable wire : single-wire Φ1.2 (AWG16), twisted wire 1.25mm
2
(AWG16),
Strand
sizeΦ 0.18mm or more
Usable wire : single-wire Φ0.4 ~ 1.2 (AWG26 ~ 16), twisted wire 0.2 ~ 1.25mm
2
(AWG24 ~ 16)
Strand
sizeΦ 0.18mm or more
Standard length of bare wire 11mm
Input terminal
Output terminal
Signal wire
Flat-blade screwdriver
See also other documents in the category KYORITSU Tools:
- 1009 (13 pages)
- 1011 (12 pages)
- 1012 (12 pages)
- 1018 (1 page)
- 1030 (1 page)
- 1061 (58 pages)
- 1051 (40 pages)
- 1109S (36 pages)
- 1110 (1 page)
- 2000 (1 page)
- 2002PA (27 pages)
- 2007A (1 page)
- 2009R (33 pages)
- 2012R (2 pages)
- 2017 (1 page)
- 2031 (1 page)
- 2033 (9 pages)
- 2040 (2 pages)
- 2046R (2 pages)
- 2200 (3 pages)
- 2210R (1 page)
- 2300R (1 page)
- 2413F (24 pages)
- 2413R (24 pages)
- 2431 (2 pages)
- 2432 (1 page)
- 2433R (1 page)
- 2434 (10 pages)
- 2500 (1 page)
- 2608A (2 pages)
- 3005A (24 pages)
- 3021 (24 pages)
- 3121A (12 pages)
- 3126 (28 pages)
- 3127 (60 pages)
- 3128 (88 pages)
- 3131A (20 pages)
- 3132A (20 pages)
- 3161A (24 pages)
- 3321A (24 pages)
- 4105A (10 pages)
- 4106 (48 pages)
- 4116A (20 pages)
- 4140 (32 pages)
- 4200 (24 pages)