KROHNE OPTISONIC 6300 EN - Manual (Page 86)

6
OPERATION
86
OPTISONIC 6300
www.krohne.com 07/2009 - 4000263902 - HB OPTISONIC 6300 R03 en
6.3 Function description
Menu No. Display Function description Selection list
X XX X Installation Installation Installation Installation
X3 X3 X3 X3 units units units units
X3.1 size unit for dimension mm, inch
X3.2 volume flow unit for volume flow L/s, L/min,L/h, m3/s, m3/min, m3/h, m3/d,
ft3/s, ft3/min, ft3/h, gal/s, gal/min,gal/h, gal/d,
IG/s, IG/min, IG/h, IG/d, bbl/h, bbl/d, free unit
X3.3 velocity unit for flow speed and velocity of
sound (VoS)
m/s, ft/s
X3.4 density unit for density kg/L, kg/m3, lb/ft3, lb/gal, free unit
X3.5 viscosity unit for viscosity cSt, mm2/s
X5 X5 X5 X5 number of paths number of paths number of paths number of paths in case "2 paths" is selected, the
measurement results will be
averaged
1 path, 2 paths
X6.3 diameter size for outer diameter of pipe min-max: 20 - 4300 mm / 0.787 - 169.3 inch
X6.4 pipe material carbon steel, stainless steel, cast iron,
aluminum, concrete, GRF/RFP, asbestos
cement, PP/PVC, acrylics, polyamide, other
X6.5 VoS pipe material min-max: 1000.0 - 4500.0 m/s / 3280.8 - 14764
ft/s
X6.6 wall thickness min-max: 1.000 - 200.0 mm / 0.039 - 7.874 inch
X6.7 liner material cement, epoxy, PP, LDPE, HDPE, PTFE, rubber,
other, none
X6.8 VoS liner material min-max: 1000.0 - 4500.0 m/s / 3280.8 - 14764
ft/s
X6.9 liner thickness min-max: 0.100 - 20.00 mm / 0.004 - 0.787 inch
X6.10 fluid water, alkanes, alcohols, oil, acids, CxHx
refined, CxHx light, refrigerant, solvents,
caustic soda, other
X6.11 VoS fluid min-max: 500 - 2500 m/s / 1640.4 - 8202.1 ft/s
X6.12 density min-max: 0.1000 - 5.0000 kg/l / 6.2428 lb/ft3 to
312.14 lb/ft3
X6.13 viscosity min-max: 0.100 cSt to 9999 cSt (mm2/s)
X9.1 transducer set short code for transducer set,
mentioned on sensor
Ta, Tb, Tc, none
X9.7 actual distance min-max: -10.00 - +9999 mm / -0.394 - +393.7
inch
X12.1/3/5 Tx serial no. factory serial number of sensor Ayy, 5 free units
X12.2/4/6 Tx calibration no. set calibration number of sensor
according to type sticker
9 free units
A Quick setup
A A A A quick setup quick setup quick setup quick setup
A1 A1 A1 A1 language language language language english, german, french, dutch
A2 A2 A2 A2 Tag Tag Tag Tag unique location in plant 12 free selectable digits
A4 A4 A4 A4 analog outputs analog outputs analog outputs analog outputs only active if HART device current output A, B or C, pulse output A, B or D
A4.1 measurement value for HART current output (depends on pipe configuration: 1 or 2 pipes)
volume flow, mass flow, VoS, flow speed, gain,
SNR, diagnosis value, volume flow 1 or 2, VoS 1
or 2
.book Page 86 Tuesday, August 18, 2009 4:51 PM