KROHNE OPTISONIC 6300 EN - Manual (Page 16)

3
INSTALLATION
16
OPTISONIC 6300
www.krohne.com 07/2009 - 4000263902 - HB OPTISONIC 6300 R03 en
Installation
3.1 Notes on installation
3.2 Storage
• Store the flowmeter in a dry and dust-free location.
• Avoid lasting direct exposure to the sun.
• Store the flowmeter in its original packing.
3.3 Transport
No special requirements.
3.4 Pre-installation requirements
3.4.1 Environmental requirements
• Pollution degree 2
• Protection class I
• Humidity: 5...80 % RH
• Temperature: –40…+60°C / -40…+140°F operating and –50…+70°C / -58…+158°F storage
• Suitable for indoor and outdoor use and certified for operating up to an altitude of
2000 m / 6562 ft
• IP class 66/67
INFORMATION!
Inspect the cartons carefully for damage or signs of rough handling. Report damage to the
carrier and to the local office of the manufacturer.
INFORMATION!
Check the packing list to check if you received completely all that you ordered.
INFORMATION!
Look at the device nameplate to ensure that the device is delivered according to your order.
Check for the correct supply voltage printed on the nameplate.
INFORMATION!
To assure a quick, safe and uncomplicated installation, we kindly request you to make provisions
as stated below.
CAUTION!
The device should be protected from corrosive chemicals or gases and dust / particles
accumulation.
.book Page 16 Tuesday, August 18, 2009 4:51 PM