KROHNE OPTISONIC 6300 EN - Manual (Page 100)

7
SERVICE
100
OPTISONIC 6300
www.krohne.com 07/2009 - 4000263902 - HB OPTISONIC 6300 R03 en
• Remove the display 3 by pressing the plastic holders on both sides 4 and carefully lay the
display aside.
• Unscrew the two M4 screws 7 at the electronics unit 5.
• Remove the small printed circuit board 6with care.
• Carefully slide the electronics unit 5, then lift it out of the housing.
Figure 7-6: Remove the display
Figure 7-7: Release printed circuit board
.book Page 100 Tuesday, August 18, 2009 4:51 PM