KROHNE OPTISONIC 6300 EN - Manual (Page 74)

6
OPERATION
74
OPTISONIC 6300
www.krohne.com 07/2009 - 4000263902 - HB OPTISONIC 6300 R03 en
6.2 Menu structure
6.2.1 Quick setup
A1 language > english / german /
french
↑ ↓ ^
A2 Tag > fill in using ↑ ↓ > ^
A3 reset > A3.1, A3.2,… ↑ ↓
A3.1 reset errors yes/no ↑ ↓ ^
A3.2 counter 1 yes/no ↑ ↓ ^
A3.3 counter 2 yes/no ↑ ↓
(underneath counter becomes active if modular IO)
A3.4 counter 3 yes/no ↑ ↓ ^
(end)
A4 analog outputs > A4.1, A4.2,… ↑ ↓
A4.1 measurement > select from list
using ↑ ↓ >
^
use at all outputs ↑ ↓
yes/no ^
if no: only HART current
output is selected
if yes: all analog outputs
are selected
A4.2 unit > select from list
using ↑ ↓ >
^
A4.3 range > fill in using ↑ ↓ > ^
use at all outputs ↑ ↓
yes/no ^
if no: only HART current
output is selected
if yes: all analog outputs
are selected
A4.4 low flow cutoff > fill in using ↑ ↓ > ^
use at all outputs ↑ ↓
yes/no ^
if no: only HART current
output is selected
if yes: all analog outputs
are selected
A4.5 time constant > fill in using ↑ ↓ > ^
use at all outputs ↑ ↓
yes/no ^
if no: only HART current
output is selected
if yes: all analog outputs
are selected
A5 digital outputs > A5.1, A5.2,… ↑ ↓
A5.1 measurement > select from list
using ↑ ↓ >
^
.book Page 74 Tuesday, August 18, 2009 4:51 PM