KROHNE OPTISONIC 6300 EN - Manual (Page 107)

TECHNICAL DATA
8
107
OPTISONIC 6300
www.krohne.com 07/2009 - 4000263902 - HB OPTISONIC 6300 R03 en
8.2 Technical data
INFORMATION!
•
The following data is provided for general applications. If you require data that is more
relevant to your specific application, please contact us or your local representative.
• Additional information (certificates, special tools, software,...) and complete product
documentation can be downloaded free of charge from the website (Downloadcenter).
Measuring system
Measuring principle Ultrasonic transit time
Application range Flow measurement of liquids
Measured value Measured value Measured value Measured value
Primary measured value Transit time
Secondary measured value Volume flow, mass flow, flow speed, flow direction, speed of sound,
gain, signal to noise ratio, diagnosis value, reliability of flow
measurement, quality of acoustic signal
Design
The measurement system consists of a measuring sensor and a
signal converter. It is only available as separate version.
Signal converter Signal converter Signal converter Signal converter
Wall-mounted housing (W) -
remote version
UFC 300 W (general purpose)
Field housing (F) - remote
version
UFC 300 F (Option: Ex version)
Measuring sensor Measuring sensor Measuring sensor Measuring sensor
Standard Small, medium or large version in aluminum
Optional Small / medium stainless steel version
Small / medium XT (eXtended Temperature).
Diameter ranges Diameter ranges Diameter ranges Diameter ranges
Small DN15...100 / ½…4"
Outer diameter must be at least 20 mm / 0.79".
Medium DN50...400 / 2…16"
Large DN200...4000 / 8…160"
Outer diameter must be smaller than 4300 mm / 169.29".
Options Options Options Options
Inputs / outputs Current (incl. HART ® ), pulse, frequency and/or status output, limit
switch and/or control input (depending on the I/O version)
Counters 2 internal counters with a max. of 8 counter places (e.g. for counting
volume and/or mass units)
Self diagnostics Integrated verification, diagnosis functions: flowmeter, process,
measured value, empty pipe detection, bargraph
.book Page 107 Tuesday, August 18, 2009 4:51 PM