KROHNE OPTISONIC 6300 EN - Manual (Page 108)

8
TECHNICAL DATA
108
OPTISONIC 6300
www.krohne.com 07/2009 - 4000263902 - HB OPTISONIC 6300 R03 en
Display and user interface Display and user interface Display and user interface Display and user interface
Graphic display LC display, backlit white
Size: 128x64 pixels, corresponds to 59x31 mm = 2.32"x1.22"
Display turnable in 90° steps
The readability of the display could be reduced at ambient
temperatures below -25°C / -13°F.
Operator input elements 4 optical keys for operator control of the signal converter without
opening the housing.
Option: Infrared interface (GDC)
Remote control PACTware ® including Device Type Manager (DTM)
All DTM's and drivers are available at the internet homepage of the
manufacturer.
Display functions Display functions Display functions Display functions
Menu Programming of parameters at 2 measured value pages, 1 status
page, 1 graphic page (measured values and descriptions adjustable
as required)
Language of display texts English, French, German
Units Metric, British and US units selectable from list / free unit
Measuring accuracy
Reference conditions Medium: water
Temperature: 20°C / 68°F
Straight inlet section: 10 DN
Maximum measuring error ± 1% of the measured value
for DN≥50 mm / 2" and v > 0.5 m/s / 1.5 ft/s
± 3% of the measured value
for DN<50 mm / 2" and v > 0.5 m/s / 1.5 ft/s
Repeatability <±0.2%
Operating conditions
Temperature Temperature Temperature Temperature
Process temperature Standard version: -40...+120°C / -40...+248°F
XT version: -40...+200°C / -40...+392°F
Ambient temperature Sensor: -40...+70°C / -40...+158°F
Signal converter: -40…+60°C / -40…+140°F
(ambient temperature 55°C / 131°F and higher: protect electronics
against self-heating, because an increase in the electronics
temperature in 10°C / 50°F steps leads to a corresponding reduction
of the electronics' service life by a factor of two).
Storage temperature -50…+70°C / -58…+158°F
Pipe specifications Pipe specifications Pipe specifications Pipe specifications
Material Metal, plastic, ceramic, asbestos cement, internal / external coated
pipes (coatings and liners fully bonded to pipe wall)
Pipewall thickness < 200 mm / 7.87"
Liner thickness < 20 mm / 0.79"
.book Page 108 Tuesday, August 18, 2009 4:51 PM