GW Instek LCR-800 Series - Manual (Page 48)

PROGRAMMING
95
0.005~1.275 (5 characters, including a
decimal) 5mV~1.275
Example MAIN:VOLT 0.005<^END^M>
Sets the test signal voltage to 5mV.
Query Syntax MAIN:VOLT?<^END^M>or<^J^M>
Return String
Voltage
MAIN:VOLT :< variable ><^END>
(= 0.005~1.275) Returns the test voltage.
Query Example MAIN:VOLT?<^END^M>
MAIN:VOLT 0.005<^END>
Returns the test voltage (5mV)
AUTO/MANU Command/Query
Sets automatic or manual measurement mode.
Syntax MAIN:TRIG:<^END^M>or<^J^M>
Parameter
Test mode
AUTO Automatic mode
MANU Manual mode
Example MAIN:TRIG:MANU<^END^M>
Sets the measuring mode to manual
Query Syntax MAIN:TRIG?<^END^M>or<^J^M>
Return String
Voltage
MAIN:TRIG:AUTO<^END>
MAIN:TRIG:MANU<^END>
Returns automatic mode
Returns manual mode
Query Example MAIN:TRIG?<^END^M>
MAIN:TRIG:AUTO<^END>
LCR-800 User Manual
96
Returns Auto mode as the current measurement
mode.
START Command
Starts a measurement in manual mode.
Syntax MAIN:STAR<^END^M>or<^J^M>
Example MAIN:STAR<^END^M>
Starts the measurement
RANGE HOLD Command/Query
Turns range hold on or off or queries the range hold status.
Syntax MAIN:R.H.:<^END^M>or<^J^M>
Parameter
Range hold
OFF. Off
ON.. On
Example MAIN:R.H.:OFF.<^END^M>
Turn range hold off
Query Syntax MAIN:R.H.?<^END^M>or<^J^M>
Return String
Range Hold status
MAIN:R.H.:OFF.<^END>
MAIN:R.H.:ON..<^END>
Range hold is off
Range hold is on
Query Example MAIN:R.H.?<^END^M>
MAIN:R.H.:ON..<^END>
Returns the Range Hold status (On)