GW Instek LCR-800 Series User Manual
Page 33
BIN
FUNCTIONS
65
For
example:
20 Ω.
Set Max/Min Absolute Limit
Background
The maximum and minimum absolute limits of the
current bin can be set. The limit units depend on
the measurement type, see Sort Type, page 63.
Panel operation
1. Move the cursor to MAX to set the
absolute maximum limit.
2.
Use the number pad to enter the maximum
absolute value for the current sort bin.
For
example:
20 Ω.
3. Repeat the above procedure for MIN.
Set Max/Min Percentage Limit
Background
The maximum and minimum limits of the current
bin can be set as a percentage of the nominal value.
The limit units depend on the measurement type,
see Sort Type, page 63.
Panel operation
1. Move the cursor to +% to set the
positive percentage limit.
LCR-800
User
Manual
66
2.
Use the number pad to enter the maximum
percentage value for the current sort bin.
For
example:
10%.
3. Repeat the above procedure for -%.
Set Max/Min Secondary Measurement Limits
Background
The absolute maximum and absolute minimum
limits of the secondary measurements can also be
set.
Panel operation
1. Move the cursor to X_MAX, where
X is the secondary measurement
item.
2.
Use the number pad to enter the maximum
value for the current sort bin.
For
example:
0.1000
3. Repeat the above procedure for X_MIN. Ensure
that MIN is smaller than or negative compared to
MAX.