GW Instek LCR-800 Series - Manual (Page 24)

47
2. Press 1 to recall the calibration
settings or 2 to cancel.
OR
3. When the status bar has completed,
the calibration settings are recalled.
4. Press EXIT to exit to the main
menu.
CAUTION
If the function keys are not active after calibration
settings have been recalled, DO NOT turn off the
instrument. Wait a few minutes and try again.
LCR-800 User Manual
48
B
IN FUNCTIONS
The Handler interface is used to sort components
into different bins. The handler menu compares
results from a number of different user defined limits.
Component sorting can be accomplished in either
manual or automatic mode. For more information on
using the handler interface to sort components please
see page 114.
Bin Functions
Handler Menu Overview ............................................. 50
Handler Menu ............................................................. 52
Mode Setting ............................................................... 52
Circuit Setting .............................................................. 53
Speed Setting ............................................................... 53
Display Setting ............................................................. 54
Frequency Setting ........................................................ 54
Select/Run Auto/Manu Sorting .................................. 55
Voltage Setting ............................................................. 56
Bias Setting .................................................................. 57
Constant Voltage Setting ............................................. 58
Delay Setting ................................................................ 59
Average Setting ............................................................ 60
Set Bin Menu
Set Bin Menu Overview ............................................... 61
Bin Menu ..................................................................... 62
Sort Type ...................................................................... 63
Bin Number ................................................................. 64
Set Nominal Value ....................................................... 64
Set Max/Min Absolute Limit ....................................... 65
Set Max/Min Percentage Limit ................................... 65
Set Max/Min Secondary Measurement Limits ........... 66
Clear Bins ..................................................................... 67
Exit Set Bin Menu ........................................................ 67