GW Instek LCR-800 Series - Manual (Page 38)

RS232 REMOTE
75
Message Area The message area displays the current status of
connection, results, files saved and restored.
Message Display
Key The Message Display Key turns the Message Area
on/off.
LCR Viewer Connection and File Settings
Background Before LCR Viewer can be used the connection
settings and file settings must be set appropriately.
Please ensure LCR Viewer has been installed.
Connection
Settings 1. Connect the LCR meter to the PC
with an RS232 cable.
2. Ensure the LCR-800 is set to
manual (single) measurement
mode.
Page 43
3. Ensure RS232 has been enabled on
the LCR meter.
Page 73
4. Run the LCR Viewer program.
5. Go to the OptionSettings menu.
6. The Settings panel appears.
LCR-800 User Manual
76
7. Choose the COM port. Please see the Windows
Device Manager for the applicable COM port
setting.
8. Choose the baud rate. (Default 38400)
9. Left click OK to confirm the
connection settings.
10. When the connection settings are
completed successfully, the LCR-
800 display will show RS232
ONLINE.