GW Instek LCR-800 Series - Manual (Page 47)

PROGRAMMING
93
Example MAIN:MODE:RQ<^END^M>
Sets the mode to R/Q (Resistance/Quality factor)
Query Syntax MAIN:MODE?<^END^M>or<^J^M>
Return String
Current measurement
mode
MAIN:MODE:RQ<^END>
R/Q
MAIN:MODE:CD<^END>
C/D
MAIN:MODE:LQ<^END>
L/Q
MAIN:MODE:LR<^END>
L/R
MAIN:MODE:ZQ<^END>
Z/Q
Query Example MAIN:MODE?<^END^M>
MAIN:MODE:RQ<^END>
Returns the current measurement mode as R/Q
CIRCUIT Command/Query
The mode command sets the equivalent circuit to series or parallel.
Syntax MAIN:CIRC:<^END^M>or<^J^M>
Parameter
Equivalent Circuit
SERI Series
PARA Parallel
Example MAIN:CIRC:SERI<^END^M>
Sets the equivalent circuit to series
Query Syntax MAIN:CIRC?<^END^M>or<^J^M>
Return String
Equivalent circuit
MAIN:CIRC:SERI<^END> Series
LCR-800 User Manual
94
MAIN:CIRC:PARA<^END> Parallel
Query Example MAIN:CIRC?<^END^M>
MAIN:CIRC:PARA<^END>
Returns a parallel equivalent circuit as the current
setting.
FREQUENCY Command/Query
Set or queries the test frequency.
Syntax MAIN:FREQ <^END^M>or<^J^M>
Parameter
Frequency (kHz)
0.01200~100.000 (7 characters, including a
decimal)
12 Hz~100kHz
Example MAIN:FREQ 0.01200<^END^M>
Sets the frequency to 12Hz (0.012 kHz)
Query Syntax MAIN:FREQ?<^END^M>or<^J^M>
Return String
Frequency
MAIN:FREQ < variable ><^END>
(=0.01200~100.000) Returns the test frequency
in kHz.
Query Example MAIN:FREQ?<^END^M>
MAIN:FREQ 0.01200<^END>
Returns the current test frequency in kHz (12 Hz).
VOLTAGE Command/Query
Set or queries the test signal voltage.
Syntax MAIN:VOLT < variable ><^END^M>or<^J^M>
Parameter
< variable > Test signal voltage