GW Instek LCR-800 Series - Manual (Page 39)

RS232 REMOTE
77
Note DataBits, StopBits, Parity and Flowcontrol cannot be
edited.
Note All file menus (File, Option, Data, Help) are restricted
in Auto mode. To change to manual mode see page 43
or 80 to change to Manual mode manually or
remotely.
LCR-800 User Manual
78
LCR Viewer File Settings
Background The LCR Viewer file system stores 10000 test
results per file. The files are comprised of the file
name identifier and file number identifier.
1 file name identifier
2 file number identifier
3 TXT File extension
The file name identifier consists of 4 user-defined
characters. The file number identifier is
incremented per 10000 test results. If LCR Viewer
is terminated before 10000 test results, the data will
be saved and then the next file will start anew. The
file number identifier starts at 0001 and increments
to a maximum of 9999. The file number identifier
cannot be user-defined, but can be reset to 0001.
Test Result
File Name
Identifier
File_Name
File Number
Identifier
File_Num Filename
1~10000 LCR_ 0001 LCR_0001.txt
10001~20000 LCR_ 0002 LCR_0002.txt
99980001~
99990000
LCR_ 9999 LCR_9999.txt
1. Ensure the LCR-800 is set to
manual (single) measurement
mode.
Page 80
2. Go to the OptionSettings menu.