GW Instek LCR-800 Series - Manual (Page 40)

RS232 REMOTE
79
File Settings 3. Choose a drive and
directory from the
drop down
selections.
4. Type a file name
identifier in the
File_Name panel.
LCR_ is the default.
5. Check FileNum Reset if you
want the file number identifier
to be reset to 0001. Then left-click
Yes to confirm.
Confirm Settings 6. Left click OK to confirm the
connection and file settings.
Note All file menus (File, Option, Data, Help) are restricted
in Auto mode. To change to manual mode see page 80
to change to Manual mode remotely.
LCR-800 User Manual
80
LCR Viewer Remote Measurement
Background The LCR Viewer Software mimics the LCR-800
meter front panel. Remote operation is identical.
To operate any of the controls remotely, a mouse
must be used. A keyboard cannot be used.
Operation of LCR Viewer is the same as the
operation of the LCR meter.
Note
If a button is grayed-out, the key or operation is not
currently selectable.
Operation 1. To choose a menu key, click any
F1~F5 menu key.
2. To use a number key, click any
of the number keys.
3. To choose an operating
mode, right click the Start
button and click the
AUTO/MANU pop-up
button.
4. To run a measurement in
manual mode, click the start
button.
5. To stop measuring in
Auto mode, right click the
start button and click the
AUTO/MANU pop-up
button.