GW Instek LCR-800 Series - Manual (Page 23)

BASIC MEASUREMENT
45
Store Recall
Store or Recall Memory Settings
Background The LCR-800 series have 100 blocks of memory
available for saving settings.
Note
All memory is stored using an internal battery. The
battery should last 3 years before replacement. If any
files cannot be saved or recalled, please contact your
local GW Instek distributor to have the battery
changed.
The LCR-827/829 can also use the stored memory
settings for Binning (page 48)
Panel operation 1. From the main menu, press MENU, SETTING
AND MEMORY.
2. Press 2 to save the current
measurement settings, or 1 to recall
a previously saved memory setting.
2
OR
3. Use the number pad to select a memory
number and ENTER to confirm the selection.
Range: 1~100
Memory
slot 10
LCR-800 User Manual
46
4. The RECALL NO. or STORE NO. will be set
accordingly.
RECALL NO:
VOLTAGE=
EXIT
RECALL
1
AVGE
1.000
VOLT
1
MEMORY
AVERAGE=
RECALL CALIBRATION
10
1.000
1
v
5. Press EXIT to exit to the main menu.
Cancel 6. Press ENTER at any of the memory
options to cancel.
Recall Calibration Settings
Background When measurement values are inaccurate, original
calibration settings can be recalled.
Panel operation 1. From the main menu, press MENU, SETTING
AND RECALL.