Yokogawa YFGW710 - Manual (Page 91)

B1-27
IM 01W01F01-01EN
B1.2.5 Task of Checking Field Wireless Network Operation
Conditions
When the download to YFGW710 from Field Wireless Configurator is completed, field wireless
devices whose provisioning is completed automatically join the field wireless network.
When the field wireless devices have joined the field wireless network, parameters of the devices
that have joined the field wireless network can be set and adjusted from PRM via YFGW710 us-
ing client/server communication.
The following describes the procedure to check whether or not the field wireless devices have
joined the field wireless network and whether or not client/server communication between
YFGW710 and the field wireless devices is possible.
B1.2.5.1 Checking Join Status of Field Wireless Devices to Field
Wireless Network
Click on [View] – [Devices] in the menu in the Main window of Field Wireless Management Tool to
open the page of the [Devices] tab.
When the target field wireless device has joined the field wireless network, information such as a
device tag and EUI-64 is displayed on the page of the [Devices] tab.
For details on the operating procedure, refer to C3, “Field Wireless Management Tool” in Part C
of this document.
n Checking Device Tag
Check whether or not the device tag displayed on the page of the [Devices] tab is correct.
l Vendor ID and Model ID displayed on the page of the Devices tab
Vendor ID and Model ID are of the vendor of the communication stack that is implemented in the
field wireless device.
l Time required for the field wireless device information to be displayed on the
page of the Devices tab
It may take a maximum of 30 minutes from when the target field wireless device has joined the
field wireless network until the device information is displayed in Field Wireless Management
Tool.
n Checking Device Status
Check that Devices Status of the device in question displayed on the page of the [Devices] tab is
“FULL_JOIN”.
l Status displayed in Devices Status
The status displayed in Device Status is “FULL_JOIN” only. The status indicates that the device
has joined the field wireless network normally.
n Checking Device Role
Check that the device role of the target field wireless device is identical to the device role speci-
fied in Field Wireless Configurator. Note that when the network is star topology, the device may
run with a device role different from the device role set in Field Wireless Configurator. For details,
refer to section B1.2.2.5.