Yokogawa YFGW710 - Manual (Page 84)

B1-20
IM 01W01F01-01EN
B1.2.3.3 Adjusting and Setting Field Wireless Device Parameters
Use FieldMate to adjust and set parameters before installing a field wireless device.
For details, refer to “ISA100.11a wireless devices” in Part I of the instruction manual (IM
01R01A01-01E) supplied with FieldMate.
Use FieldMate R2.03.00 or later to do this work.
Note that this work need not be done before installing a device in the field. Use PRM via
YFGW710 to adjust and set parameters of field wireless devices after installation. For details,
refer to Chapter B1.2.6.
B1.2.4 Downloading to YFGW710
Download to YFGW710 the project database information created by the field wireless network
offline engineering described in section B1.2.2.
The tasks in B1.2.4 and the following subjections are supposed to be performed by the system
engineer (or the startup engineer) after the wireless devices are delivered to the plant site of the
customer.
When downloading to YFGW710 is completed, the field wireless device whose provisioning task
is completed is able to join the field wireless network.
The following tasks need to be performed.
• Registering Provisioning Information with the Project Database
• Downloading to YFGW710
B1.2.4.1 Registering Provisioning Information with the Project
Database
This is a task to obtain the provisioning information from the provisioning information file created
in the procedure in section B1.2.3.2 and register it with the project database of Field Wireless
Configurator.
For details on the procedure to register the provisioning information, refer to C2, “Field Wireless
Configurator” in Part C of this document.
Note that this task must be performed before downloading to YFGW710.
The provisioning information (EUI-64 and Join Key) is shared by the field wireless device and
YFGW710.
The provisioning information is shared by the field wireless device and YFGW710 by obtaining
the provisioning information from the provisioning information file, registering it with the project
database, and then writing it to YFGW710.
l Registration Information
The following information of the provisioning information file data is registered with the project
database.
• EUI-64
• Join Key
• Provisioner: Name of user who performed provisioning using FieldMate
• Date: Time of day at which provisioning was performed using FieldMate
TIP
The above information that was registered cannot be changed from Field Wireless Configurator.