Yokogawa YFGW710 - Manual (Page 76)

B1-12
IM 01W01F01-01EN
B1.2.2.3 Registering Field Wireless Device
Register the field wireless device to allow it to join the wireless network. For details on the regis-
tration procedure, refer to C2, “Field Wireless Configurator” in Part C of this document.
After registering the field wireless device, set the following related parameters.
Table B1-8 Setting Field Wireless Device Parameters
Parameter name Setting value Remark
Device Tag Enter the device tag set to the field wireless
device by provisioning in section B1.2.3.2.
Up to 16 single-byte capital alphabet letters,
numbers, hyphens, and underscores can be
used.
When an incorrect device tag is set, “Reg-
istering a Provisioning Information File with
the Project Database” and “Downloading
to the Field Wireless Device” described
later cannot be executed correctly.
EUI-64 EUI-64 of the target field wireless device Automatically registered during the task
of “B1.2.4.1 Registering a Provisioning
Information with the Project Database”
described later.
Join Key Join key of the target field wireless device
Device Role Device role of the field wireless device For details, refer to section B1.2.2.5.
Provisioner Name Name of user who provisioned the target field
wireless device
Automatically registered during the task
of “B1.2.4.1 Registering a Provisioning
Information with the Project Database”
described later.
Provisioning Time Time at which the target field wireless device
was provisioned. It is displayed in UTC.
B1.2.2.4 Loading a Capabilities File (CF)
Before performing User Application Engineering in section B1.2.3.5, it is necessary to obtain a
Capabilities File (CF) of the target field wireless device and load CF during the task of registering
the field wireless device using Field Wireless Configurator.
Copy CF to the specified folder and load it using Field Wireless Configurator. For details on the
procedure, refer to C2, “Field Wireless Configurator” in Part C of this document. For the copy
destination, refer to section “■ CF Copy Destination Folder” described later.
n CF
CF contains information on the vendor name, model name, and revision of the field wireless
device, and built-in process data (measurement values such as flow rate, temperature, and pres-
sure). CF is provided by the device vendor.
TIP
Do not change the content of CF with a text editor or the like. If it is changed, “User Application Engineering” in
section B1.2.2.5 cannot be performed correctly.