Yokogawa YFGW710 - Manual (Page 86)

B1-22
IM 01W01F01-01EN
The confirmation dialog box appears when you perform the following procedure: open the page
of the Devices tab while the network information is being displayed in the right pane in the Main
window of Field Wireless Configurator, click the Load Devices List button in the toolbar, and then
select and open the provisioning information file to read.
The following explanation uses “DEV_001”, “DEV_002”, and “DEV_003 *” in Figure B1-6 as an
example.
In the [Newer Devices] field on the right of the confirmation dialog box, device tags are displayed,
whose provisioning information in the provisioning information file is to be registered with the
project database.
A device tag marked with an asterisk “*” (e.g. DEV_003*) indicates that the device tag exists in
the provisioning information file, but the device tag in question does not exist in the project data-
base.
In such a case, clicking the [OK] button, while the check box on the left of the device tag is
checked, registers the device tag and the provisioning information with the project database.
A device tag without an asterisk “*” (e.g. DEV_001) indicates that the device tag in question exists
in the provisioning information file and the project database, and clicking the [OK] button, while
the check box on the left of the device tag is checked, updates the provisioning information in the
project database.
The [Older Devices] field on the left of the Confirmation Dialog window indicates that the device
tag in question exists in the provisioning information file and the project database (e.g. DEV_
002).
A device displayed in the [Older Devices] field indicates that the same provisioning information
is already registered with the project database, or older provisioning information is about to be
registered. Even clicking the [OK] button, while the device tag check box is not checked, does not
update the provisioning information in the project database. Clicking the [OK] button, while the
device tag check box is checked, updates the provisioning information in the project database.
The lower pane may show the device tag name and the message “Different Device Tag” (exam-
ple: DEV_004). In this case, no provisioning information for the device tag has been imported.
This means that the device tag in the project database differs from the device tag in the provision-
ing information file although they have the same EUI-64 address. For example, this message
appears when a device tag is changed by reprovisioning without changing the device tag for the
device in the project database. If this happens, either change the device tag for the device in the
project database or correct provisioning in the device so that the device tag in the project data-
base for the device matches the device tag in provisioning information file.