Yokogawa YFGW710 - Manual (Page 175)

C3-21
IM 01W01F01-01EN
n Device Details
Double-clicking on a device in the list will open the Device Details window featuring four addi-
tional tabs described in the following sections.
l Device Information
The Device Information tab page displays general as well as specific information about the de-
vice.
Figure C 3-19
The following details are available, in addition to those already indicated in the device list:
• Subnet ID: ID of the subnet that includes the device
• Manufacturer: Name of the device manufacturer
• Revision: Radio firmware version
• Power Supply Status: Indicates the following power supply status for the device
• Line Powered: when the device is line powered
• > 75%: when the device is battery powered, and the remaining capacity of the battery is
greater than 75%
• [25%, 75%]: when the device is battery powered, and the remaining capacity of the bat-
tery is between 25% and 75%
• < 25%: when the device is battery powered, and the remaining capacity of the battery is
less than 25%
• Device Health: Number of transmitted/received packages and the number of failed trans-
missions/receptions
The Last Read section displays the following object attributes of the last data read by Publish/
Subscribe of the selected device.
• Time and date of the last read
• TSAP ID (TSAP layer ID)
• Object ID (Object layer ID)
• Attribute ID (Attribute layer ID)
• Value (Process value)
The same details are also shown at the Readings window (Refer to section C3.3.2.2.4).